• Welcome to World Machine Community. Please login or sign up.
September 19, 2019, 06:06:00 pm


Read the Development Diary for an inside look at World Machine's progress!

Post reply

The message has the following error or errors that must be corrected before continuing:
Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.
Note: this post will not display until it's been approved by a moderator.
Other options
Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:

Shortcuts: ALT+S save/post or ALT+P preview

Topic summary

Posted by Kivak
 - June 16, 2015, 06:39:24 pm

I also found this might help you: https://www.youtube.com/watch?v=TiHTb7mSPNY

It's a speed run of the entire making of the terrain from world machine to world painter. :)
Posted by Maximum-Dev
 - June 16, 2015, 04:45:21 am
Quote from: Kivak on June 13, 2015, 10:46:08 pm

Wow that is an amazing landscape... was that originally created in WM? I've been trying to make rock formations like that for quite some time... any pointers on how you did it?

Thanks dude, Remnant has attached the file above. Feel free to download and take a look at it.
Posted by Kivak
 - June 13, 2015, 10:46:08 pm

Wow that is an amazing landscape... was that originally created in WM? I've been trying to make rock formations like that for quite some time... any pointers on how you did it?
Posted by Maximum-Dev
 - March 11, 2015, 02:40:08 am
Thank you. It was a really great help for someone who doesn't have geology knowledge. (Though I wish to learn at some point)  :D

Many thanks.
Posted by Stephen
 - March 10, 2015, 02:54:35 pm
So, two things:

1) Looking back at the original world pic you posted, I do believe that there was some terracing applied before erosion there. The key, however, is to mask the terracing so that the ledges only occur in certain places instead of everywhere.

2) Channeled-type erosion will especially carve gullies that run the entire slope of the terrain -- changing your erosion mode can help remove that.

I've attached a slightly modified version of your world showing those two changes below. Note that I'm also showing the sediment mask instead of the flow mask -- this is more likely to be what you want.

It's also not necessarily unrealistic at all to have erosion gullies that run from near the top all the way down to the valley floor! For example, here's a real world image of Mt Stuart near where I live that I took last summer showing the gullies I'm talking of:

And then the output of the modified example showing a similar erosion style:

Posted by Maximum-Dev
 - March 10, 2015, 09:48:42 am
Thank you both for the reply but couldn't do it. There is also a second issue I'm going to show you plus explaining more on the first problem.

The second problem is the length of the erosion. Red is so unrealistic where erosion starts from top and goes down on the ground level. Blue is what I'm after. Below is an example of what I mean:

The erosion starts from top but doesn't go down to ground level and yet the ridge is steep and there are snow variation among the rocks. (grass in pic of OP). In my wm file erosion goes as long as steepness goes.
Currently my WM image you see in this post is just lines lines and more lines. where I'd need grass etc. to have some variation along the erosion like the image in the OP.

I attach the WM file here if you can do what you mean I can take a look into it and understand better. Thank you.
Posted by Stephen
 - March 09, 2015, 02:11:17 pm
I agree with JakBB, erosion usually works best when it's working with an underlying surface that has a rough/textured surface already. Trying to directly erode a sketched shape will probably produce a lot of straight-line-erosion results. Applying fractal noise to your guide shape usually works before the erosion usually works much better!
Posted by JakBB
 - March 09, 2015, 09:06:19 am
I guess your problem is you're relying on the erosion way too much, try and experiment changing some parameters on the erosion device, also I suggest you to feed into the erosion device a very detailed terrain, with lots of variations on the slopes...
Posted by Maximum-Dev
 - March 07, 2015, 03:27:11 pm
Hello there :)

I'm not sure if the title is right but here's the question:
Usually when I make mountains its eroded from top straight to the ground. meaning if the slope at top starts with 45 degrees it also ends that way, therefor unrealisticly only rocks and suddenly grass for example. I found this image over reddit and this is exactly what i want to make. notice many green between the mountain top and bottom part of the mountain. Its not all rock from top to down. i try terrace before eroding but thats not it.