Post reply

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

Name:
Email:
Subject:
Message icon:

Verification:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:
The name of this software is World Machine. What is the first (bolded) word in the name?:

shortcuts: hit alt+s to submit/post or alt+p to preview


Topic Summary

Posted by: manleystanley
« on: January 29, 2005, 06:10:01 AM »

hmm... Just downloaded the build for this, but haven't loaded it into WM yet. I'd never thought of useing one of my strata gray scales as the input for terrace modulation.  Don't know if this was how it was done, but reading this gave me the idea. Off to check out the build and see about the strata gray scales, may try them as inputs on some of the other sprockets.  :)
Posted by: Fil
« on: January 27, 2005, 01:56:20 AM »

Quote from: cbalaskas
Here's my attempt at Wind.

Looks nice! That stratified effect is different from what we usually see using the terrace device... Haven't played with it much, but I do like the effect.
As for turning that into a macro, I could give it a shot.. But I don't know yet how that "seed" problem would be solved.. The macro would probably not have any "terrain" input, and be just a generator-like device.. don't know yet..
Posted by: cbalaskas
« on: January 25, 2005, 10:11:37 AM »

Here's my attempt at Wind. It's not a macro, as I'm not skilled in writing them, so please accept this .tmd until a macro-savvy individual steps up.

See the page link below for download and previews:

http://balaskas.homestead.com/TGStuff.html

The two perlins share the same SEED, and this seems to give the best results. The Wind Mask.bmp was used to expose a strata.bmp (created with StrataGen2 http://www.jens-bringewatt.de/stratagen2/) on the "windward" side of the terrain.

Please experiment, have fun and post your results.
Posted by: Sethren
« on: January 03, 2005, 09:26:55 PM »

Nifty effect Fil... now that can be used for getting rather exotic patterns out of ones terrains... something i can experament with... well like Remnant said... more then likely we will need a new erosion device... probably called Wind Erosion obviosly... well... nice attempts from everyone... thanks guys...

Sethren  :)
[/img]
Posted by: manleystanley
« on: January 03, 2005, 06:50:37 PM »

I some how think that would be a bit beyound my rusty GWBasic.
Actually I would like to see a common conjoining erosion sprocket{?}.  Working on a build for it ,  but.....
Posted by: Remnant
« on: January 03, 2005, 03:41:56 PM »

My hunch is that this effect might be only able to be done with a new erosion device specifically simulating the effect.

After v1.0, anyone is free to take a crack at it by writing their own plugin.
Posted by: manleystanley
« on: January 03, 2005, 06:26:19 AM »

:?  see What? nothing with firefox, lets try IE; eeeek. Nope, nothing there eather ; except the infomus red x.  Never mind, posted this, firefox reloaded the page and there they are.
I like the look of the second one, it looks like finer sand bulding up behind; down wind, of corse sand. nice.
 My idea has led me to trying this build to make multipel rivers converging. We shall see.
Posted by: Fil
« on: January 03, 2005, 04:14:30 AM »

Ok, in order to commemorate breaking the psicological barrier of 100 posts in this forum, I present you the images resulting from my attempt at making wind erosion... ta-da!


As you can see, they don't look much like wind erosion :( but I do like the "streaks" effect.. they do seem like short dunes..  I'm now wontdering what would be the result if a certain noise was added to displace them.. somehow...

I would very much like to thank Oshyan for lending me his mastering genious in quickly applying a texture and rendering them in TG.. (these are only test images with a quick texture.. noting really hard to do in less than 2 minutes)

Cheers,
Posted by: Fil
« on: January 03, 2005, 03:20:19 AM »

Hmm.. Well, over here, results aren't spectacular either.. Based my approach on that Angled Strata idea, where the terrain is "tilted" by add a gradient, then terraced, and the subtracted the gradient again.. But instead of terracing it, I eroded it.. This way I would "control" the flow of the erosion... Sounds nice doesn't it? :) well, It's all theory :P in practice it didn't look as nice.. Basically the river erosion takes too much land out of the ground... what we want is more like getting land out of walls.. So that gave me a socnd idea.. to use the slope selector, in conjunction with the select angle and apply some glaciation transformation to it (transform device). I can't say I am happy with it!.. So instead of using the transform device, I used the expander device set to tighten.. I lost a bit of detail, but the end result was better..
The glaciation would lower the height of a wall, past below the ground's height.. It's rendering now..
Posted by: Sethren
« on: January 03, 2005, 12:42:23 AM »

OK... i know it can not be done and i will explain why... the kind of erosion we are talking about here sweeps at a generally level plain of motion displacing the loose dirt, soils and sands over very long distances... in other words the wind being blasted across far distances at high speeds is not the same as fluvial erosion types were it comes from above and goes downward from water flow seeking lower parts of the land which is what we are getting every time... sorry but unless one can edit a simular effect in a seperate application then import the hieght map into world machine it can not be done... i hate importing images because world machine does not save that image import with the file preset... maybie v1.0 has some goodies that can bring us closer to that wind erosion... who knows?

Sethren
Posted by: Sethren
« on: January 02, 2005, 09:42:07 PM »

in case i get really bored i suppose i can have one more go at it! well... good luck!

Sethren

[/img]
Posted by: manleystanley
« on: January 02, 2005, 07:50:45 PM »

Didn't say I was done. Still therorizing. Too stubern.
Posted by: Sethren
« on: January 02, 2005, 06:31:26 PM »

OK i installed World Machine... could not resist... will redo the PC later... messed with the devices all day... close but no cigar... world machine just can not do that type of pattern... basically it is a very very long fluvial-like erosive pattern that is kind of wavy and that it does not effect the local rough terrains but just sweeps over it with the blown sands effecting the lower less rough elevations... very neat but do not think it is possible currently in this version... oh well... i tried!

Sethren  :cry:
Posted by: manleystanley
« on: January 02, 2005, 09:47:29 AM »

odd, Just got back on after having my brother and family over for brunch. The kids had to have the TV on the cartoon network and they sat there watching the old superman cartoon from when I was a kid.  Then got here to fil's post.

Hope noone gets upset if I burn a little band width here.
http://www.terranuts.com/photopost/showphoto.php?photo=7365
the latest version. And  they say a picture is worth a thousand words so...


Almost looks like the render. I'm thinking about replacing the combiners with choosers and inputing the Dunes macro. ???
Posted by: Fil
« on: January 02, 2005, 07:09:46 AM »

Super Fil? hmm... My name is actually Filark Flent, and I am a news reporter for the Daily WM-Plannet :D
I think I know that Super Fil guy.. I can try t talk to him to see if he can do anything ;) but he has been on vacation for a while, maybe he can come up with something :). I just don't know how better will it be comparing to Manley's attempt.

"Super" Cheers,