• Welcome to World Machine Community. Please login or sign up.
October 15, 2019, 07:17:50 pm


Read the Development Diary for an inside look at World Machine's progress!

How to load a wheel loader

Started by bestloaders, June 27, 2019, 12:16:11 am

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


Proper transportation processes, such as the use of a properly sized transport vehicle, proper loading, securing and positioning devices, minimize productivity problems. Below are instructions on how to load a wheel loader for safe transportation.
Choose the correct trailer to pull your size wheel loader

The first step in loading the wheel loader is to select the correct trailer. You should consider a trailer that has sufficient size and capacity to accommodate the size of the machine and all the accessories of the wheel loader. When transporting a large wheel loader, an RGN trailer is required for safe transportation. For small wheel loaders, step deck trailers or hot shot trailers are the perfect vehicles for transportation, but compact wheel loaders can be shipped quickly and safely with flatbed trailers. Make sure you get the right vehicle before you start your trip.
Follow the basic loading guidelines
It is crucial to follow the loading guidelines stipulated in the owner's manual to ensure you do not miss critical details. The proper loading procedure includes:
•   Check and see that you have packed the trailer onto a level ground
•   Make sure the ramps designs can handle the weight of your wheel loader. If necessary, add some blocking under the ramp for support.
•   Make sure the equipment and the ramp are free of debris, mud or grease that can cause the wheel loader to slide.
•   With the heaviest head of the wheel loader, travel up the ramp while you are loading the loader onto the trailer.
•   Run the engine of the loader at the lowest speed setting and travel at the slowest speed possible while loading the equipment.
•   Make sure that the weight of the wheel loader is evenly distributed on the vehicle to avoid pull and tire wear during transportation. The best way to ensure the weight balance is to check the suspension of the transportation equipment and make sure it is balanced.
Secure the equipment properly
Once the wheel loader is on the transportation device:
•   Lower the attachment or the bucket to the floor, stop the engine and disconnect the battery switch to the off position.
•   Before any transportation starts, ensure all the doors and covers are locked, and wheel loaders with articulation points, hinge or pivots have articulated lock frame to prevent any articulation during transit.
•   Place chocks, cradles, and wedges in front of wheels to prevent any shifting or rolling during transportation.
•   Install all tie downs in front and rear tie down positions. Always use recommended secure and connection points to maximize effectiveness and minimize damage during transportation.
•   Inspect tie-down equipment and tie-down points used to secure the machine. Make sure all connection points and pins are secure, and th
e hooks are functional.
•   Verify the wheel loader's tire pressure before loading to avoid loosening of tie-downs, Refer to the owner's manual for proper tire pounds.
Secure the wheel loader's attachments efficiently
Securing the wheel loaders accessories and attachments is essential.  The enclosures should be secured to the wheel loader if possible. If not possible, set the attachments on the trailer on an orientation that can easily be contained by chains. Make sure you secure the buckets the transportation equipment.
If the loader is equipped with hydraulic attachments, ensure the orientation of the hose does not interfere with the machine on the trailer. All horses should lie underneath the device connected in a manner that they could become disengaged. Ensure you secure all the hoses per the owner's manual before you start transportation.
Wheel loaders transportation does not have to be a complicated process. Heavy haulers follow the proper loading guidelines and ensure the attachment of the machine and

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Note: this post will not display until it's been approved by a moderator.

Please leave this box empty:
Type the letters shown in the picture
Listen to the letters / Request another image

Type the letters shown in the picture:

Shortcuts: ALT+S save/post or ALT+P preview